When you’re excited about a soothing session and you find that the sauna is not working, it may be annoying. To get back to relaxing, you must solve the problem as soon as you find yourself in this situation. Make sure the spa has had enough time to warm up before using it, especially if the outside temperature is below average.

Your steam room may have a problem with its power supply, temperature, or heating element if, even after 45 minutes, it’s still chilly. The majority of these problems are simple to locate and fix using standard troubleshooting methods. I’ll list the typical causes of your sauna’s failure to heat up below, along with some useful advice for identifying and fixing them.

The primary causes of a sauna not heating up

The following are the main reasons why a sauna won’t turn on, broken down into reasonable steps:

• Verify the power supply. Make sure the spa is powered on and connected. Check to make sure the circuit breaker or fuse hasn’t exploded or tripped.
• Examine thermostat settings: Ensure that the thermostat is operating properly and is set at the right temperature. Test it by changing the temperature and observing the reaction.
• Examine Heating Elements: Look for any evidence of damage, such as burned-out areas or damaged wires, on the heating parts. If required, replace any damaged parts.
• Test the control panel. Confirm that the digital connection or control panel is operating as expected. If screens or buttons don’t work, there might be a problem with the control panel.
• Evaluate Ventilation: Make sure the ventilation system in the spa is operating properly. Poor ventilation has the potential to stop heat from moving through the sauna, keeping it frozen.
• Examine Insulation: Look for any holes or other damage in the insulation of the cabin. The steam room might not reach the right temperature because of poor insulation’s ability to lose heat.
• Expert Inspection: Contact a qualified spa technician for additional diagnostic and repair work if solutions to the problem are unsuccessful in resolving the issue. They are capable of recognizing and resolving more complicated heating system problems in the steam room.

See more: How Much Does It Cost to Run a Sauna? (Average Monthly & Annual)

What’s the duration needed for a sauna to heat up?

It’s important to remember that conventional spas are made to produce steam and quickly increase the room’s temperature—typically to 180–195°F. You might thus not experience the benefits right away after entering. It usually takes 30 to 45 minutes for a house’s spa to heat up enough. This period may differ based on variables including the sauna’s beginning temperature, size, and heating element output. See the troubleshooting suggestions below for help if, after 45 minutes, your steam room still doesn’t achieve the correct temperature.

How do I analyze a sauna that isn’t working?

There are several efficient ways to analyze a non-functioning sauna:

• Visual Inspection: Start by giving the sauna’s electrical, ventilation, control panel, and thermal components a close examination. Keep an eye out for any overt indications of damage, including broken wires, burned-out heating components, or broken controls.
• Check Power Supply: Make sure the circuit box or fuse hasn’t burned and that the sauna is correctly connected to a power supply. To make sure it’s working properly, test the power outlet with something else. Reset the switch or switch the fuse if needed.
• Test Thermostat and Controls: Check the controls and thermostat to make sure they are working properly. Ensure that the thermostat is adjusted to the right temperature. Change the temperature and watch how the steam room reacts. There might be a problem with a control panel or cable if the controls are unusable or unresponsive.
• Assess Heating Performance: Keep an eye on how well the sauna heats over time. If the cabin does not achieve the appropriate temperature in the expected duration of time (typically 30 to 45 minutes), take note of many elements, such as the sauna’s size, the quality of its insulation, and the heating element’s strength. If the steam room does not heat up enough, there may be more serious issues with the furnace that require a professional inspection and repair.

How do I reset a sauna that isn’t working?

A broken sauna may frequently be fixed by resetting it. The steps to follow are as follows:

• Switch Off: Remove the spa plug from the electrical socket to cut off the power source. As an alternative, turn off the circuit breaker or take out the fuse related to the power supply for the spa.
• Wait. Give the steam room at least five to ten minutes without using any electricity. The electrical components of the bathhouse have time to properly reset during this break.
• Reconnect Power: After the prescribed waiting time, plug the spa back into the electrical socket or turn on the circuit breaker or fuse to reconnect it to the power source.
• Test: Switch on the spa and see how it works. Verify that the sauna reaches the required temperature within the planned time range, that the controls are flexible, and that the heating components are operating as intended.
• Troubleshooting: Check the power supply, the thermostat, the controls, the heating components, and the sauna’s general performance. If those methods don’t solve the problem, reset the spa and try again.

After following these steps, if the steam room is still not working, more expert assistance could be required to find and fix the underlying problem.

How do I repair a sauna that isn’t working?

The first step in fixing a broken sauna is to troubleshoot typical problems with the power supply, thermostat, heating components, controls, and ventilation. Make sure the electrical breaker or fuse hasn’t blown and that the spa is connected correctly. Assess the flexibility of the thermostat’s controls and settings and make any necessary adjustments.

Examine the heating units for damage and swap out any broken parts. Make sure the ventilation system is operating correctly so that the heat can circulate properly. Consider getting expert help from a steam room specialist for additional diagnostic and repair work if fixes are unsuccessful.

What is the cost of a sauna repair?

The kind and scope of the required repairs determine how much it will cost to fix a steam room that isn’t heating up. Simple repairs, like changing the lightbulb in a steam room or the thermostat, could only cost a few dollars in materials and labor. More significant fixes, such as fixing water damage or changing the sauna heater, might cost several hundred dollars. In general, the following variables affect how much sauna repairs cost:

• The price of the necessary replacement parts.
• The kind and extent of repairs that are needed.
• Labor costs.
• The age of the bathhouse and its overall condition.

What is the lifespan of a sauna heater?

A sauna heater’s lifespan usually extends between five and twenty years, depending on how often it is used and what kind of heater it is. You may need to repair your steam room quicker if you use it frequently—over three times a week—or if your smaller radiator is subjected to extreme strain. In cases where the heater becomes outdated and several reset attempts fail, it may be wise to think about replacing it.

Conclusion

Many advantages may be obtained from a properly functional spa, such as less stress, better sleep, healthier skin, relief from joint and muscular discomfort, weight loss, increased metabolism, detoxification, faster recuperation of muscles, and an all-around higher quality of life. If your sauna isn’t heating up, you should check for any blocked air vents and inspect your wiring, thermostat, heating components, and power supply. Speak with a technician for clarification if you’re still unsure.

See more: Can Saunas Treat Acne? (Break Outs, Pores, Pimples, & More!)

FAQs

The most frequently asked questions are given below:

Why does my sauna heater keep shutting off?

Please make sure no fuses have blown before starting. After that, while the heater is on, check to see if all of the heating components are glowing. If there isn’t, the heater may have been turned off due to an overheating safeguard switch breaking.

Why does my heating not feel warm?

Even with the heating on, the rooms are cold.

This issue frequently indicates insufficient warm air circulation. Possible causes include defective HVAC fans, clogged vents, or problems with the burner itself. Verify that no textiles or furnishings are blocking your vents.

What is the lifespan of a sauna?

15 to 25 years old.

If properly cared for and maintained, most saunas have a 15–25-year lifespan. Maintaining a well-maintained bathhouse is crucial to extending its lifespan, as it includes exterior and interior surface care.

See more: Carbon vs. Ceramic Sauna Heaters (Benefits & Risks)